BEST DATA PRODUCTS, INC. SMART ONE 336FLX, SMART ONE 336FLXMAC Card Type Modem (asynchronous) Chipset Unidentified I/O Options None Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Bus Serial Fax Class Class I & II Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error Correction/Compression MNP5, MNP10EC, V.42, V.42bis [Image] CONNECTIONS Function Label Function Label DC power in CN1 Line out CN4 RS-232/422 port CN2 Power switch SW1 Line in CN3 DIAGNOSTIC LED(S) LED Color Status Condition PWR Unidentified On Power is on PWR Unidentified Off Power is off AA Unidentified On Auto-answer enabled AA Unidentified Off Auto-answer disabled CD Unidentified On Carrier signal detected CD Unidentified Off Carrier signal not detected RD Unidentified On Modem is receiving data RD Unidentified Off Modem is not receiving data SD Unidentified On Modem is transmitting data SD Unidentified Off Modem is not transmitting data TR Unidentified On DTR signal is high TR Unidentified Off DTR signal is low RI Unidentified On Phone is ringing RI Unidentified Off Phone is not ringing OH Unidentified On Modem is off-hook OH Unidentified Off Modem is on-hook SUPPORTED STANDARD COMMANDS Basic AT Commands +++, ‘comma’, A/ A, B, D, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z &C, &D, &F, &G, &K, &Q, &R, &S, &T, &V, &W, &X, &Y, &Z Extended AT Commands \A, \B, \G, \K, \N %C, %E, %L, %Q Special AT Commands #CID, :E, *H, -K, -Q, @M, +MS S-Registers S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, S14, S16, S18, S21, S22, S23, S24, S25, S26 S28, S29, S30, S31, S32, S33, S36, S38, S39, S40, S41, S46, S48, S82, S86, S91, S92, S95 Note: See MHI documentation for complete information. UNIDENTIFIED COMMANDS Command Default S37 0 S201 Unidentified Proprietary AT Command Set DISPLAY INFORMATION Type: Immediate Format: AT [cmds] In [cmds] Description: Displays information requested about the modem. Command Function I0 Displays product identification code. I1 Displays ROM checksum. I2 Tests and reports ROM checksum. I3 Displays firmware model, revision, and interface. I4 Displays modem model number. I5 Displays country code. I6 Displays data pump model and revision. I7 Displays the DAA code. See BEST DATA PRODUCTS, INC. SMART ONE 2834F for a full command summary.